Description
We have in stock an extensive range of aluminium crush washers. These are used to seal fittings such as banjo’s, male nipples and plugs that screw into a hole that does not have a flared seat. It is recommended that washers should only be used once and that the sealing surface should be a machined finish.
Part Number |
Suit Thread Size |
O.D. Size |
901-03 |
3/8″ / 10mm |
1 |
901-04 |
7/16″ |
1 |
901-05 |
1/2″ / 12mm |
1 |
901-06 |
9/16″ / 14mm |
1 |
901-08 |
18mm |
1 |
901-10 |
7/8″ / 22mm |
1 |
902-04 |
1/4″ BSPP |
1 |
902-06 |
3/8″BSPP / 16mm |
1 |
902-08 |
1/2″ BSPP |
1 |